Perfection is not something that comes easy. If you want to do anything to perfection, you need to master the art, do a lot of practice, and be patient. The same case applies to Screen Printing Denver; even those who are skilled in this art will find that at times they have made some mistakes.
There are some mistakes in screen printing that should not be assumed. This is my because they could cause severe damage to the identity of the brand especially when they are not pointed out in time. However light as it seems, this could cause huge financial loss. Therefore, below are some of the common errors made by printers that should be avoided at all cost.
One the common ones are like the use of too much ink. It could be that the ink has thinned out or that there is excessive use of the product on the item. Therefore any user should test the ink before use on few samples in order to be sure it is the right quality. When the ink is much, you need to use little pressure when printing.
Another problem could be when the ink is too little. If this is the case try using a soft base and if you are doing seams and collars a plate will be more appropriate, and it should be shielded in a neoprene textile. There are other times when the scene is congested, and in this case, you need to polish the underneath with a damp towel, and then you do a few trials just to be sure.
Make sure that your customer has signed and agreed to the final phase of the design before you can go ahead to start copying. When you are finally copying, make sure that you have all the right, and all your spellings are correct because it could be depressing for you to start over after the final print.
The other mistake that people do is not to take the time to master the squeegee angle mastering of the position of the squeegee takes practice and experiment. Once you have found the right angle, strive to be consistent. The strokes that you use are also essential. Since there are two types the push and pull, whichever you decide to use, stick with it and do not change between the strokes. If inconsistent, you will have a work that is poorly done.
The other thing you need to contemplate about is the bad registration. If you do not have it tightened screen, then the plate might move. Therefore you need to turn the screw and ensure that it is tight. If it is lost, the screen might be loose in the bracket of the press. At the same time, ensure that the plate has enough adhesive to stop the shirt from moving.
If you take care of these possible mistakes and make sure they do not happen, then your work will be quality. Since practice makes perfect, you will have problems only when you are starting, but with time you will realize you have mastered the art. That way you will be sure you can produce something that is perfect.
There are some mistakes in screen printing that should not be assumed. This is my because they could cause severe damage to the identity of the brand especially when they are not pointed out in time. However light as it seems, this could cause huge financial loss. Therefore, below are some of the common errors made by printers that should be avoided at all cost.
One the common ones are like the use of too much ink. It could be that the ink has thinned out or that there is excessive use of the product on the item. Therefore any user should test the ink before use on few samples in order to be sure it is the right quality. When the ink is much, you need to use little pressure when printing.
Another problem could be when the ink is too little. If this is the case try using a soft base and if you are doing seams and collars a plate will be more appropriate, and it should be shielded in a neoprene textile. There are other times when the scene is congested, and in this case, you need to polish the underneath with a damp towel, and then you do a few trials just to be sure.
Make sure that your customer has signed and agreed to the final phase of the design before you can go ahead to start copying. When you are finally copying, make sure that you have all the right, and all your spellings are correct because it could be depressing for you to start over after the final print.
The other mistake that people do is not to take the time to master the squeegee angle mastering of the position of the squeegee takes practice and experiment. Once you have found the right angle, strive to be consistent. The strokes that you use are also essential. Since there are two types the push and pull, whichever you decide to use, stick with it and do not change between the strokes. If inconsistent, you will have a work that is poorly done.
The other thing you need to contemplate about is the bad registration. If you do not have it tightened screen, then the plate might move. Therefore you need to turn the screw and ensure that it is tight. If it is lost, the screen might be loose in the bracket of the press. At the same time, ensure that the plate has enough adhesive to stop the shirt from moving.
If you take care of these possible mistakes and make sure they do not happen, then your work will be quality. Since practice makes perfect, you will have problems only when you are starting, but with time you will realize you have mastered the art. That way you will be sure you can produce something that is perfect.
About the Author:
When searching for professionals that are experienced in screen printing Denver locals can pay a visit to our recommended homepage. For further guidance, please make sure you contact us via this link http://www.freshagenda.biz.
ليست هناك تعليقات:
إرسال تعليق